25th Anniversary Edition Rink Attributes

Backyard Rink Hockey Panels
25TH ANNIVERSARY RINK APPROX. RUNNING FT. COSTS OR EA. (“all Services” means drilled and countersunk and bevelled edges where applicable.)
  • Sill Cap/TEP are in the same position but have a different name based on design of your rink. If you are using 2 x ‘s 25th edition rink used 2” x 12”s. The Top Edge /Sill Cap would be 1.5” wide x ?L comes with all services bevelled and drilled countersunk $1.38 per running foot Bottom line is that bigger rinks call it a Sill Cap and smaller rinks a Top Edge Protect.
  • TEP(TOP EDGE) shown in black @ 1.50” width x ?L $1.38 per running foot
  • TEP shown on the face as a red stripe @ 1.5” x ?L (same size as black Top Edge) $1.38 per running foot
  • Outer Cladding in 1/4″ white approx 5.25” x ?L (same material as dasher inside) all service includes bevels, drill and countersunk 16″ OC. $3.50 per running foot
  • Outer Cladding in 1/4″ black approx 5.25” x ?L (same material as dasher inside) all service includes bevels and drill and countersunk 16″ OC. $3.50 per running foot
  • Dasher Inner white 1/8” puckboard roll named LPS (Liner Protection) based on 2”x 12”s which are actually 11.25” in width. $1.50 per running foot no services.
  • Transition pieces from SOS (step over sides) to TRU Corners not priced

TRU Corners include 1/4″ white Dasher lower level and plexi upper level. Dbl stack TRU Corners measure 22.5” high

  • Lower Ice Level *TRU System set of 4 (includes puckboard dasher and solid steel TRU Corner) $275.00 X 4 per lower corner
  • Upper Level *TRU System set of 4 includes plexi (Lexan is the trade name) dasher and solid steel TRU Corner) $295.00 X 4 per upper corner
  • Kickplate in 1/8″ yellow x 4″ width .66 per running ft.
  • Colored matching screws per 100 $10. bag

Not sure of the service levels desired but basically 2 levels are available. 1. Plain and 2. Bevelled edges where necessary, drilled and countersunk 16”OC.

Have priced for services here for your maximum approx. quote. Plain is available at a lesser cost.

  • Support 45’s where necessary to secure the frame length and width $5.50 ea.
  • 5in 1 Rink Stake where necessary $6.50 ea.
  • End pieces include Dasher on inside and cladding on the outside at approx. same size being 24” x ?L $6.38 per running foot. No services. Plain cut.

We always suggest when budgeting that you add another 10-15% for items you may wish or costs not included in this quote.

For best results a level site is ideal.

We do not include wood costs as your price may be different in your own home town.

Hope this helps out. Let us know if you have any thoughts, issues or discussion.

Your resident rink GURU….Brian Young.

Guru footnote * Our Polaris 800 RZR bush bumper of very basic design retails for approx. $400. cdn. Our well thought out and very clever TRU Corner design complete with Puckboard Dasher, cable ties for easy on and easy off and includes Liner Protection option in powder coated steel sells for only $275 ea. and with the Plexi option for just $295.00 per corner. Incredible value!!! Why such good value? Cause we know you need 4 of them or perhaps 8 for the dbl stack 22.25″ high end rink option. Partnering with you for your success! We have a few 60″ TRU Corners available for $200. off for a set of 4 used as display rink. They are available in Maple Leaf blue. Also available are the 96″ TRU Corner used as display rink (2 pieces per full 96″ corner) in Maple Leaf Blue for $400. off per set of 4 corners. (8 pieces total) Please call for availability of these TRU Corners @ 1.800.448.6648 Limited supply!!

*Put your masterpiece away in just an hour…

Playful. and Practical


* Presto Tear Down is currently shown in our photo gallery, a mere 45-60 minutes to disassemble your Ultimate Rink and put it away……..but eight months later is fall set up. When you are ready for set up, Ultimate Rink 25th edition will feature a very short set up time needing only a few screws and your drill.

Video coming soon! We will feature video and discussion of it’s attributes and ease of assembly for starters. The capabilities it has for Presto Install on a level site are revolutionary.

After your original assembly, in your first year, you can have a spectacular rink with the potential of a **1 hour set up and the look of a high end ultimate rink (with about 200 screws). This 25th Anniversary Special Edition rink will feature, as mentioned, Presto Install, Liner Protection, and transition pieces with Step Over Sides merging with our TRU Corner System. Stunning and Ultimate, Playful. and Practical


Presto Install is our name for a product or system that minimizes your annual set up and tear down times. This 25th Anniversary Special Edition Ultimate Rink System features our premium, ultimate look with fast set up and tear down times.

*1 hour set up or tear down time will be dependent on the size of you rink and the number of accessories you have selected. In summary however, regardless of your vision, the time line for assembly will vary and will be be considerably faster than a standard set up, ideal for the busy world we live in.


Now we feature 4 different ways of protecting your liner.

25 years ago, we introduced Liner Protection (LPS). It has since evolved over the years and we have introduced another option that has been incorporated into our 25th Anniversary Presto Install Edition.

TRU Corners

Our 25th Anniversary edition of our TRU Corners also features Liner Protection. These amazing patented corners took 4 years of product development and were finished and ready for our 25TH Anniversary in rink season 2017/18.


  • Stackable and interchangeable modular sections – If you wish a corner that can be used with a 2″ x 12″, The TRU Corner fits perfectly. If you wish a rink that looks like our 25th Anniversary version, just stack 2 TRU Corners, followed by the transition piece to your Step Over Sides. If you wish the height of a regulation rink, stack 4 for a total of 44″. Regulation Rink Height ranges from 42″ – 46″
  • Liner Protection with your liner placement – Your liner fits into the lower channel behind a Puck Board panel, therefore, hiding it from abuse of everyday rink use (including pucks, skates and snow clearing tools)
  • Ripple Wire or Wiggle Wire incorporated into each TRU modular section – This allows for install of Plexi panels, Puck Board panels or advertising signage. Your family name and a logo and/or lighting for night time skates or hockey can also be Presto Installed with simple cable ties
  • Step Over Sides – When you run out of room during skating or the game, Step Over Sides allow you to escape with a simple step over. The side walls are tall enough to contain pucks and allow you the play of the game you love.

Your oasis in the middle of winter! Happy to partner in your success!

Praesent felis ut quis venenatis, Praesent